- #Lsi sas2008 firmware download ubuntu 14.04 update
- #Lsi sas2008 firmware download ubuntu 14.04 software
- #Lsi sas2008 firmware download ubuntu 14.04 zip
Now copy the sas2flash tool for i686 and 圆4 systems to our firmware-upgrade folder ~]# cp ~/Installer_P12_for_Linux/sas2flash_linux_i686_x86-64_rel/sas2flash ~/firmware-upgrade/ Step 3 – Flash the firmware
#Lsi sas2008 firmware download ubuntu 14.04 zip
I have downloaded the sas2flash utility for linux from this link let’s download and extract the content from the zip ~]# wget Since we are gonna flash the original Dell firmware we can flash directly from Linux OS (Centos 7 in my case) without creating a bootable MSDOS USB Stick. ~]# cp -rf ~/SAS/payload/* ~/firmware-upgrade/įor flash the firmware LSI provide a tool called sas2flash. We don’t need all those files but only the content of the payload folder, so create a new folder and copy the files ~]# mkdir -p ~/firmware-upgrade/ 1 root root 181848 libstorelib.soĭrwxr-xr-t. 1 root root 101425 duppmdatacollector.bin The extracted content it will look like this: ~]# ll SAS So we need to extract the content from the file, in order to do it, run the following command: ~]# bash SAS-RAID_Firmware_NX9T4_LN32_07.03.05.00_A08.BIN -extract SAS
#Lsi sas2008 firmware download ubuntu 14.04 update
This Update Package is not compatible with your system configuration Since we are running on HP hardware and not on Dell hardware if you run the binary you will receive the following error: Go on the Dell website and downlod the Linux version of the firmware for the PERC H200 (). Since Dell provide an official firmware we are gonna use it. (LSI9211-IT or LSI9211-IR here an explaination about the two modes) On the web there are lot of tutorial for convert this card from Dell brand to original LSI firmware. The PERC H200 card that I’ve bought come with a very old firmware version (2010 I think it’s the first release) and it doesn’t support HDD major than 2 TB, only the recent firmware will support them. Now let’s stop talking and let’s start with the facts. Plus it works (only in BIOS mode) and fit perfectly on the Microserver (only the connector for the discs is not easy to fit).īy taking a look on various forums (in particular this on ) they suggest the LSI 92XX series. So in the end I have chosen a Dell PERC H200 RAID card (it’s an LSI 9240-8i PCI SAS/SATA) because it’s a good and also cheapest RAID on the market. On the Microserver there are only two core (It’s an AMD Opteron X3216 APU) so the server will became busy only for handle read/write operations.
#Lsi sas2008 firmware download ubuntu 14.04 software
I have also discarded Linux software RAID for performance issue, sometimes it use a lot of I/O. Plus I have tested it and it didn’t recognized a failure on one of the HDD and the Marvell Utility on Linux is a crap so I have discarded it. I have decided to use an additional RAID card because for the Marvell SATA controller RAID I have see a lot of discussion about weird issues (ex: RAID no more recognized after a poweroff and power on). Add an additional PCI Express RAID card.Microserver RAID (Marvell SATA controller 88SE9230).Yes, if you where asking why backups, the answer is pretty simple, RAID doesn’t substitute backups. Since I need a reliable system I have decided to implement a RAID 1 (2x 3TB HDD) and use an external 3TB for backups. In my house I have an HP Microserver Gen 10, I use it as NAS and hypervisor for a few virtual machines. That’s it! Now you can remove the HDD/HDDs from the system, hope this guide have helped you. When migration finished I removed the disk from the volume group and then removed the LVM signature from the disk: vgreduce vms /dev/sdb I started then to monitor the progress of the migration with: progress lvs -a -o+devices Lucky for me I have setup the Microserver Gen10 with LVM this will simplify a lot the procedure that I gonna explain to you below.įirst of all I have initialized the physical volume with the command: pvcreate /dev/sdcĪfter this I have extended my logical volume called “vms” with vgexent command: vgextend vms /dev/sdcĪfter that I started the migration of all Logical Volume from physical volume /dev/sdb to the new physical volume /dev/sdc: pvmove -b /dev/sdb /dev/sdc I bought a new set of disk for my HP Microserver Gen10, 2x 10Tb WD HDD, after setting them in RAID 1, I had the necessity migrate the currently running Virtual Machines without creating downtimes, loosing data and of course not waste much time to perform this migration.